Schluter Systems DH E BW Manuel d'installation

Schlüter®-DITRA-HEAT-EUnder tile and stone heating with Schlüter®-DITRA technology Installation ManualInstallation Helpline: 01530 813396

10Heating Cable Installation:Floors: The stud spacing of the uncoupling membrane is 3 cm. Heating cables should be installed with a distance of 9 cm (

11 Sub floor Schlüter®-DITRA-HEAT-MA Heating cable Temperature resistant thin bed adhesive Sensor Tile or Stone Perimeter movement joint

12Wiring diagram:The Schlüter®-DITRA-HEAT-E-R and Schlüter®-DITRA-HEAT-E-RS digital ther-mostat must be installed by a qualified electrician, according

13L = mHeated area in m² 136 W/m2Heated area in m²200 W/m2Watt Art.-No. Amps Total Ohm*12.07 1.1 0.7 150 DH E HK 12 0.65 amps 352.6717.66 1.6 1.0 225

14InstallationSample installationsBathroom 2 x 4 m 8 m² of uncoupled floor space,5.5 m² of heated space,sensor positioned in the floor equally between 2

15InstallationBathrooms Schlüter®-DITRA-HEAT-E-WS Complete set 1:3.2 m² of uncoupled wall area, 2.6 m2 of heated surface sensor positioned in the wa

16InstallationcbbaB1 B2 B3B1B02.25 m0.6 mB1 B2 B3B1B02.25 mLPEN****FloorWall200 W/m2136 W/m2136 W/m2  a b a b  

17InstallationInstallation InstructionsPlease read these instructions carefully before starting the installation work. The electrical connection must

18Installation A suitable thin-bed adhesive is applied to the substrate with a notched trowel (6 x 6 mm). To achieve improved initial bonding adhes

19Certified installer:1.) Testing and start up log, Schlüter®-DITRA-HEAT-EProject: Date of installation:Certified electrician: Date of start up:2.) H

2Schlüter®-DITRA-HEAT-ESchlüter®-DITRA-HEAT-E is a under tile and stone heating system for floors and walls that quickly creates comfortably warm envir

Schlüter-Systems KG · Schmölestraße 7 · D-58640 Iserlohn · Tel.: +49 2371 971-261 · Fax: +49 2371 [email protected] · www.schlueter-systems.com

3Schlüter®-DITRA-HEAT-EAdvantages of Schlüter®-DITRA-HEAT-E:Pleasant room climate Based on gentle radiated heat and maintaining the natural humidity o

4Schlüter®-DITRA-HEAT-E-RSchlüter®-DITRA-HEAT-E-R is a digital touchscreen thermostat providing full control of time and temperature for floor and wall

5Schlüter®-DITRA-HEAT-E-FFSchlüter®-DITRA-HEAT-E-FF is a spare remote sensor (4 m) for the Schlüter®-DITRA-HEAT-E heating system.(Product data sheet 6

6InstallationSubstrates for Schlüter®-DITRA-HEAT:Always check the substrates on which Schlüter®-DITRA-HEAT is to be installed to make sure they are ev

7InstallationSynthetic coverings and coatings: All surfaces must be weight-bearing and, if necessary, pre-treated, to allow for the bonding of a suita

8Schlüter®-DITRA-HEAT-E – Floor heatingSchlüter®-DITRA-HEAT-E-HK heating cable required at 136 W/m2heated area in m² Art.-No.1.1 DH E HK 121.6 DH E

9cbbaSensor and thermostat position:a) Schlüter®-DITRA-HEAT heating cableb) Sensor installed within the uncoupling membranec) Digital thermostatPlease